Features:
- Face and Top Grind in a single setup with backpacked wheels
- 5-axis CNC Controls with memory allow free programming of virtually any tooth geometry and indexing pattern
- Store an unlimited number of programs on removable media cards
- Vertical Blade positioning with Flat grind
- Full Cabin design runs oil or synthetic coolants
- Lift-Off and Shear Face Grinding
- Programming to skip broken teeth and oscillate grind newly brazed teeth
- Reference bar and tooth sensor for repeatable saw blade positioning
- Automatic plate thickness compensation
- Variable grinding wheel speed for superior finish grind quality
- Metal working (ie. Braun Schweig) Geometry software & open programming (CA triple chip) software is standard
Standard Machine Includes:
- Wheel flange
- Heavy Flood coolant system with external level indicator
- Internal sprayer for cleaning the machine
- 2 high-precision, low taper cup & cone mounting fixtures for bores from 5/8” to 3 1/2” Hi- intensity, low voltage machine lamp
- Multi tap transformer for voltage stabilization
- Small Saw Attachment
| MACHINE SPECIFICATIONS | |
| Blade Diameters | 100-800mm (4–32“) or 47" for AL1200 |
| Tooth Pitch | 6 to 130mm (5.1”) or 6" max. for AL1200 |
| Grinding Motor | 1 HP |
| Maximum blade thickness | 10mm (.375 inch) |
| Hook Angles | -15 to +40 degrees |
| Grinding Wheel specs | 175mm(7”) face & 125mm(5”) top x 32mm |
| Air Requirement | 6 Bar, 85 PSI |
| Voltage | 220/440V, 3Ph, 60Hz |
| Weight | 900kg (1980 lbs) 1400kg for AL1200 |
Optional Coolant Systems
- Automatic Paper roll filtration system for oil to 35 micron, 13 GPM for oil, 88 gallon tank
- Cartridge Filtration System**
to 5 micron, 15 GPM, includes 2 cartridges & installation kit
Mist Extraction Systems
- Mist extraction system for use with Synthetic coolants
- Mist extraction system for use with Oil coolants**, Double Centrifuge Collector with air filter
Automatic CO2 Fire Suppression System
- Custom designed Kidde fire suppression unit for oil coolants. System uses sensor to automatically dispense CO2 in case of fire or extensive heat. System equipped with full control panel, battery backup, and emergency shutoffs. Carbon Dioxide is a clean, dry, non-corrosive, inert gas, which does not damage machine parts.
Other Options
- Hollow Face Grinding Assembly (variable up to 50,000 RPM)
- 7” Index Stroke Assembly (OEM option only)
- 35" Maximum Blade Diameter Capacity (OEM only)
- Strobe Saw Clamp Jaw Set (Beveled PVC)
| RECOMMENDED GRINDING WHEELS | ||
| Diamond Wheel-Topping 6A9 5” x 32mm** (special bond for use with oil or well filtered synthetic coolant) | 240/500 grit | C08055-02 |
| Diamond Wheel-Face 12V2 7” x 32mm** (special bond for use with oil or well filtered synthetic coolant) | 320 grit | C23003-02 |
CBN Wheel - Topping 6A9 5" x 32mm For Stellite tips | 120/280 grit | C08062-02 |
